Moisture Balance
Obsolete – Replaced by the FD610.
This fully-electronic model uses an infrared heat lamp for gentle, yet effective drying. Samples of 5-70g can be quickly dried with continuous, timed, or automatic modes. Simple operation and reliable, accurate performance, combined with reasonable cost make the FD600 the choice for many laboratory and process applications.
The FD600 offers a 185 watt bulb, while the FD620 provides a 300watt heat source and RS232C output to PC or optional thermal printer (VZ300)
$1,795.00
Additional
| Weight | 11 lbs |
|---|---|
| Dimensions | 17 × 11 × 23 in |
Related Products
-
Dual Control Moisture Balance
$5,495.00Unique innovative design minimizes the chance of scorching a test sample. A traditional temperature sensors automatically controls the drying temperature. A second, separate infrared temperature sensor monitors the surface temperature of the sample. If the temperature approaches a level that would scorch or burn the sample, the drying temperature is automatically adjusted downward. This avoids scorching and bad test results.
Both temperature settings are customer selectable.Using high speed quartz heating elements, the FD800 provides unsurpassed direct LOD drying and full ISO compliance.The large pan (almost 5″ in diameter) and large sample capacity (up to 120 grams) allows heterogeneous samples to be accurately tested. Also, homogenous samples may be quickly dried by spreading them on the large heating tray.
Quartz heating elements provide 3-5 times the life of halogen competitors, while providing the same fast start-up times. This provides a lower total cost of ownership without any productivity sacrifice.
Direct connect connections interface to almost any Microsoft Office application for smoother data capture and ISO compliance.
See: FD800 for the brochure.
-
Moisture Balance
$2,195.00Obsolete – Replaced by the FD720 and FD610.
This fully-electronic model uses an infrared heat lamp for gentle, yet effective drying. Samples of 5-70g can be quickly dried with continuous, timed, or automatic modes.
The RS232 output can be used with the optional thermal printer to provide documentation of test results.
Simple operation and reliable, accurate performance, combined with reasonable cost make the FD620 the choice for many laboratory and process applications. The FD600 offers a 185 watt bulb, while the FD620 provides a 300 watt heat source and RS232C output to PC or optional thermal printer (VZ300).
See: FD620 for the brochure.
-
Moisture Balance – Infrared Heat
$2,195.00Obsolete – Replaced by the FD720 and FD660.
This fully-electronic model uses an infrared heat lamp for gentle, yet effective drying. Samples of 5-70g can be quickly dried with continuous, timed, or automatic modes.
Simple operation and reliable, accurate performance, combined with reasonable cost make the FD600 the choice for many laboratory and process applications.
The FD600 offers a 185 watt bulb, while the FD620 provides a 300watt heat source and RS232C output to PC or optional thermal printer (VZ330).
See: FD610 for the brochure.
-
Infrared Moisture Balance
$1,895.00Obsolete – Replaced by the CS10.
One of our older moisture balances. Infrared heating lamps provide consistent ambient temperatures while minimizing scorching. The sample weight is limited to 5g and temperatures between 50 and 155 degrees.
The replacement model for this unit is the fully-electronic FD620.