Disk / Ball Friction System
Disk-on-disk and ball-on-disk friction coefficients and abrasion can be measured with the H20. A disk or ball indenter is loaded onto the test piece and connected to a highly-sensitive straingauge. As the turntable rotates, the load is transmitted to the PC software to display measurements up to 999,999 revolutions.
Rotational speed can be set between 10 and 600 rpm for varied analyses. Even delicate changes in friction can be readily identified and quantified for coating assessment or lubricant evaluation.
$29,500.00
Additional
Weight | 81 lbs |
---|---|
Dimensions | 31 × 20 × 30 in |
Related Products
-
Multi-Functional System
Rated 0 out of 5(0)SKU: HEIDON14DR$46,500.00The 14DR provides immediate, accurate readings of many types of property measurements. By being able to measure static and dynamic friction coefficients, adhesion, scratch hardness, stickiness, tensile strength, and peel resistance with one unit, lab space is minimized and a consistent interface for measurements and data collection are provided. Various tests can be performed by changing test fixtures (jigs) and selecting the test parameters on the integrated computer software.
-
H38
Rated 0 out of 5(0)SKU: H38$28,900.00Benchtop low cost surface property tester including a 1000gf loadcell, Sapphire needle(0.05R 90 degrees x 1), Vertical gauge for sapphire needle(1), a set of combination deadweight, Power cable(1), Acrylic resin cover(1), Parts box(1), Tool spanner(1) and Operating instruction manual(1). Commissioning and Tribosoftware w/PC are not included. The set of combination deadweight includes 200gx1, 100gx2, 50gx1, 20gx1, 10gx2, 5gx1, 2gx1 and 1gx1.
-
Continuous Load Tester
Rated 0 out of 5(0)SKU: H22$72,500.00Similar to the H18L, the H22 allows a ball indenter to be loaded in addition to scratch needle loading. Thin to thick film adhesion, real-time measurement of friction (due to abrasion), surface scratch hardness and tackiness can be evaluated by this system.
-
Desktop Tester
Rated 0 out of 5(0)SKU: H14S$42,500.00The 14S provides immediate, accurate readings of many types of property measurements. By being able to measure static and dynamic friction coefficients, adhesion, scratch hardness, stickiness, tensile strength, and peel resistance with one unit, lab space is minimized and a consistent interface for measurements and data collection are provided. Various tests can be performed by changing test fixtures (jigs). This system does not include the ability to output data.