Multi-Functional System
The 14DR provides immediate, accurate readings of many types of property measurements. By being able to measure static and dynamic friction coefficients, adhesion, scratch hardness, stickiness, tensile strength, and peel resistance with one unit, lab space is minimized and a consistent interface for measurements and data collection are provided. Various tests can be performed by changing test fixtures (jigs) and selecting the test parameters on the integrated computer software.
$46,500.00
Additional
| Weight | 81 lbs |
|---|---|
| Dimensions | 31 × 20 × 30 in |
Related Products
-
Variable Normal Load Friction and Wear Measurement System
$72,500.00This Heidon product is a variable normal load friction and wear measurement system. It adds displacement measurement and image recording to the friction measurement.
The reliability and precision of this system is maintained while various functions have been included. The HHS2000/HHS3000 contains the ability of both high and low vertical loading with a travel speed of 0.1-20mm/second, an AC servo motor as its drive motor, and a rack and pinon as its drive method.
-
Reciprocating Scratch Analyzer
$49,000.00Advanced reciprocating scratch and surface property analyzer. Touch screen control and digital data collection software.
-
Continuous Load Tester
$72,500.00Similar to the H18L, the H22 allows a ball indenter to be loaded in addition to scratch needle loading. Thin to thick film adhesion, real-time measurement of friction (due to abrasion), surface scratch hardness and tackiness can be evaluated by this system.
-
Scratch Tester
$22,700.00Scratch resistance is calculated as the result of continuous loading. A scratch needle is loaded onto the test surface. The mobile base holding the test piece travels with the applied load. When the scratch or film peeling begins, the vertical load can be calculated as the distance to the failure point can be precisely measured.
Various needle diameters and materials can be used to properly test almost any surface. Scratch hardness an be measured by using a fixed load instead of the continuous load module. This system includes an analog output and PC data collection system.