Welcome to Kett - Tomorrow's Testing Today

USD|ENG

KJT170 Portable NIR Composition Analyzer

Portable NIR Composition Analyzer: Multi-Component Analysis You Carry to the Sample

A battery-powered handheld that reads several organic components at once from a single non-contact measurement. Point it at a surface from about 150 mm, and near-infrared light returns composition data in seconds, with no contact and no sample preparation.

  • Multi-component analysis: Six measurement filters read moisture, water activity, fat and oil, protein, starch, and caloric value together, with ash calculated by difference.
  • Truly portable: Battery-powered handheld with a built-in distance-indicator beam, so composition analysis goes to the material.
  • Non-contact and non-destructive: Reads finished and delicate surfaces from about 150 mm without touching them.

Contact Kett for Pricing

Multi-Component Composition Analysis in a Portable Instrument

The KJT170 put six-filter near-infrared composition analysis into a handheld, battery-powered body. It measures several organic components at once, moisture, fat and oil, protein, starch, and more, from a non-contact reading taken in place, without carrying the sample to a benchtop analyzer.

Why a Portable Composition Analyzer

  • A separate test for every component: Six measurement filters return moisture, water activity, fat and oil, protein, starch, and caloric value together, with ash calculated by difference, replacing the drying oven, Soxhlet extraction, and Kjeldahl digestion run one at a time.
  • Samples you cannot bring to a lab: The handheld, battery-powered design goes to webs, sheets, and production lines for composition checks taken in place.
  • Contact and surface damage: Non-contact reflectance from about 150 mm reads finished and delicate surfaces without touching them.
  • Slow lab methods: A near-infrared reading returns in about two seconds.

Built for Portable Analysis

The KJT170 stores up to 50 calibration channels, one per component, holds up to 99 time-stamped readings in memory, and offers sample, monitor, and average measurement modes. Two-level password protection guards stored settings, a tungsten lamp rated for roughly 20,000 hours supports long service life, and RS-232C connects the unit to a PC or printer. At about 1.1 kg, it travels easily. Every Kett instrument carries a One Year Total Care Warranty covering parts, labor, and specification compliance, with Maintenance Agreements available.

Service and Replacement

The KJT170 is no longer manufactured. For composition measurement on a production line, the replacement is our KJT700 Online NIR Composition Meter, which measures in place as product runs. For near-line or laboratory desktop measurement, the replacement is our KB270 Desktop NIR Composition Meter, which delivers the same multi-component analysis with higher precision on the bench.

Weight 6 lbs
Dimensions 20 × 20 × 8 in
Measurement Principle

Near-Infrared Reflectance

Measurement Range

0.00–99% (product dependent)

Accuracy

±0.01% (reference method dependent)

Resolution

0.01%

Reproducibility

0.01%

Response Time

Approximately 2 seconds

Refresh Rate

0.2 s

Applications

Moisture, water activity, and organic components

Measurable Components

Ash, Caloric value, Fat/oil, Moisture, Protein, Starch, Water activity

Form Factor

Handheld

Measurement Diameter

Approximately ø25 mm

Measurement Distance

150 mm ±25 mm (built-in distance indicator)

Number of Wavelengths

6 plus reference

Light Source

Tungsten lamp

Sensor Type

Reflectance with shock-resistant polymer housing

Display

LCD, 15 characters × 8 lines

Measurement Modes

Sample, monitor, average

Compensation Functions

Temperature compensation; analytical curve correction constants

Features

Auto-zero adjustment, smoothing in six steps (0–5), password protection, self-diagnostics, 3/8 in. tripod bolt receiver, ABS body with paint finish

Data Memory Capacity

Up to 99 readings

Calibration Curves Available

50 channels, one per component, developed via PC software

Safety Features

Low reflectance, motor rotation error, internal temperature high/low, channel setting error, calculation error, RAM error, sensor error, common failure output

Operating Temperature

10–40°C, non-condensing

Operating Humidity

0–90% RH, non-condensing

Communications

RS-232C (optional)

Power

Rechargeable battery pack (6V, 2400 mAh) or AC adapter (6V, 2.5A)

Battery Life

45 minutes (average)

Dimensions

172 (W) × 210 (D) × 102 (H) mm (excluding battery pack)

Weight

1.1 kg (2.4 lbs) (excluding battery pack)

Standard Accessories

Zero adjustment hood, two battery packs, battery charger, plug adaptor, strap, user's manual, warranty

Options

Thermal printer, PC software, AC adapter, spare battery pack and charger, sample container, extension hood

Warranty

One Year Total Care Warranty covering parts, labor, and specification compliance. Maintenance Agreements available.

No reviews yet

Be the first to review this product! Your feedback helps other customers make informed decisions.

Write a Review

Reviews

There are no reviews yet.

Be the first to review “KJT170 Portable NIR Composition Analyzer”

Your email address will not be published. Required fields are marked *

Have a question? Ask our team.

Our engineers are happy to help with product questions, applications, and technical support.

Ask a Question